The correct transportation and placement method of high and low temperature test box

1. Handling and transportation of high and low temperature test chamber

1. When carrying, you should lift your feet, not grasp the door handle to exert force, let alone drag on the ground;

2. The maximum inclination angle of the cabinet should not exceed 15 degrees, let alone inverted or placed horizontally, otherwise it will damage the compressor or cause the refrigerating oil in the compressor to flow into the refrigeration pipeline, affecting the refrigeration, and easily cause the compressor to unsprung.

3. During transportation, avoid bumping and violent vibration, and prevent rain and water.

2. Placement method

1. The high and low temperature test box should be placed far away from the heat source and not exposed to direct sunlight. Because it needs to exchange heat with the outside during work, it will dissipate heat to the outside through the condenser. The higher the outside environment temperature, the slower the heat dissipation, which increases the consumption. Electricity, poor cooling effect.

2. The compressor should be placed in a place with low humidity. Because the high and low temperature test chamber shell, condenser and compressor are all metal materials, if the air humidity is too high, these parts will rust and shorten the use of the high and low temperature test chamber. life. At the same time, humid and overheated environment will cause condensation on the surface of the test box and affect the performance of the machine.

3. It should be placed in a well-ventilated place. If the high and low temperature test chamber is filled with debris or is too close to the wall, it is not good for heat dissipation and will affect the cooling effect.

4. It should be placed on a flat and solid ground and the compressor should be kept level. This is not only for safety, but also makes the compressor work smoothly, reducing vibration and noise.

5. It should not be placed in a place where the temperature is too low. Because the temperature is too low, the compressor is difficult to start.

6. It should not be placed in an environment with flammable, explosive and corrosive materials.